Kenmore Model 362.75980891 Gas Range Top Burner Lighting Problem
My Kenmore Model 362.75980891 gas range has a problem of lighting up one of four burners. When I position at 'Lite' position for any one burner, all four burners starting lighting
up and only the one I am turning has gas to be lighted. When I tried to light the problem burner and put it at 'Lite' position, the glow light looks OK, but can't light up burner. In addition, I smelled gas. I then use lighter next to burner and repeated step, it lights up burner by lighter with about 1/3 of flame compare to the full flame. I also did a test by using lighter with our flame and let ligher's gas out and put close to glow light when I tried to light the burner. The glow lights up my lighter and immediately lights burner
, too. I am guessing it might be some blockages of gas coming out. However, if I turn it to full flame position
, it works normal. Does anyone here know how should I do to fix this problem, failure on part or blockage? How can I test it uses multi meter? Thanks in advance!
View related: Kenmore stove duplex burner problem2012-07-08 05:26:39I have a Kenmore stove.
It has a dual burner where if you turn the knob one way it heats the 6' burner and turning it the other way heats the 9' burner.
This burner stopped working correctly. The 6' burner would not heat in either setting. In the 9' setting, just the 9' 'donut' around the 6' heats.
Could this just be a switch problem or are we talking control board?...
Kenmore Oven Door Opens Half Way.2012-10-07 02:21:33I have a Kenmore stove/oven, model # 362.6101197, I have to replace the hinges and the parts list is not clear on this issue. What part or parts would I ask for at the store, and how do I change them on this model? Youtube vids are good, but none of them are a Kenmore oven, thanks for any help....
Kenmore model 790 Stove burner almost inop2012-03-08 01:01:57I have a Kenmore model 790 Stove that one of the large burners is almost inoperative. It only works on high. I bought this in 2004. I tried to call Sears for warranty work, but they refuse to accept their own warranty. SO now I think I have to at least figure out the issue myself. When I turn the dial to any other setting but High the burner does not work. I think the issues is either in the switch or the element. How would I go about determining which one? I am thinking of pulling both the good and 'bad' burner and switching them to see what happens. Is there an easier way?...
KitchenAid Range Burners Not Fully Heating2011-10-25 16:16:48Hi,
I have a KitchenAid electric range with a smooth cooking surface, model # KERA205PSS.
Recently the right front burner and the left rear burner stopped heating properly. They will heat up somewhat, but won’t get very hot. The other two burners are both dual burners and they still work fine as does the oven.
Since both burners (or elements) started having the same problem at the same time, I’m guessing that the problem lies with some sort of controller and not with the elements themselves. Does anyone have any idea how I should go about debugging this range?
Kenmore C880 (Whirlpool) Range - Stove Top Not Working2011-12-26 20:46:32We have a Kenmore (Whirlpool) ceramic top, self-clean electric range.
My wife turned on the oven last night to heat the food. About 10 minutes later, the range produced like a strong vibrating sound (for a couple of seconds) and some smoke. We turned off the oven immediately - there was a little smell of burned electrical wire, but not very strong.
After about 10 minutes continued to use the oven without problem. Tried later to use the top elements, the orange LED besides the control knob comes on, but the top of the range is dead - no heat from any element.
I tried the manual for fuses, but there is no mention.
Any ideas what the problem may be?
The range is about 12-14 years old and never had a problem. We use the top daily, the oven occasionally and the self-clean very rarely.
thermador gas range burner won't light, model pd362011-10-25 03:15:57while using the left front burner to cook it suddenly went out and won't relight, 2 left burners won't light and the igniter does not click there is no gas flow either because it won't light with a match, but the right burners front and back work fine....
Tappan stove top burner control Q2012-07-22 06:06:02I have a Tappan range with 4 stove top burners; 2 small, 2 large.
Are all 4 stove top burner controls the same?
One front burner is OFF or FULL ON. No temp control.
Nearest city 75miles. Thought I'd switch a couple controllers, if they're the same, until I get a chance to visit the big city.
Range pigtail2012-04-10 17:42:58My daughter and son-in-law bought me a new smooth top electric range for Christmas. We put the old range in the basement for me to can on, since the canner would be too heavy for the smooth top range.
We placed it next to the dryer, thinking we could just unplug the dryer and plug in the range when needed - however, the pigtails are different and the dryer is 30amps and the range 50 amps.
Can we change the pigtail on the range since I'll only be using one burner for canning ? (The oven no longer works)
Thanks for your help....
Whirlpool Super Cap 465-no click, no flam2011-10-25 04:19:10Good Morning,
I have the above stove Model # SF315PEED, sn#RH0223382. It is a gas stove but the igniter is electric, so forgive me if I'm in the incorrect arena.
We have been lighting our stove top with matches for the last week. There has been no click on any of the 4 burners, but the gas is releasing to light. The top has been lifted and I tried one of the knobs and it clicked a little. Checked the rest and they are clicking now too. I am wondering if I should just order the replacement igniter module or if it could be at the switch itself where it is acting up.
I am also wondering if I need to replace the gas burner control component Gas Burner or Control Component 3196449 Order now for same day shipping. 365 day return policy. RepairClinic.com
because the back 'tube' is loose, as in I can turn the tube and spring a full revolution on the metal base.
Thanks for the help.
electric stove burner issues2012-09-14 09:22:01We have a 1980's Kenmore range made by Frigidaire. The big burners have a strange-to-me quirk. The knobs are labeled lo - 2 - 3 - 4 - 5 - 6 - 7 - 8 - hi. They seem to work just fine from lo all the way up to 8. Lo is low and the range up to 8 seems to be fine. But ... at 8, the temp jumps to high and the burner starts glowing and there is no control from 8 on up to hi.
As far as I can remember, they have always worked this way. The problem is, I've been canning a lot lately, and balancing the heat right an '8' is more than frustrating.
Does anyone else's stoves work this way? I'm guessing I need to replace the switches ...
Cooking With Jimhttp://cookingwithjim.simanco.net...
No Gas getting to GE Profile Range --2011-10-25 05:36:16Hi.. we have a GE Profile Range (about 5 years old). Was working fine about a week ago and then we came back from vacation and nothing seems to be working. We get the clicking noise, but the burners or the oven do not turn on. Tried lighting with a match - nothing. Doesn't seem to getting any gas to the burners or the oven. I don't think it's the gas line, as our hot water seems to be functioning well. Don't want to open up the gas line to test the pressure of the natural gas.
Could it be this Oven Burner Ignition? If so, where is it and what's the best way to fix this? Does this regulate the gas to the burners?
Hoping someone can help....
Kenmore c970-330036 - Gas stove top wont light2011-10-25 03:15:18Hey,
I have a Kenmore c970-330036 (from research on here and other sites it appears to be made by Frigidaire) and none of the burners on the stove top light.
It is in a rental unit, which I occupy the main floor, someone else occupies the lower floor, I pay for electricity they pay for the gas, however when they moved in, they didn't sign up for gas and we have since had our gas shut off, the problem was rectified but since the gas has been turned back on I can't seem to get the stove top burners to work. Any help would be great, as far as I know and have read I don't think there is a pilot light but may be just the sparking on the stove top that ignites the burners.
strange electric range problem2012-08-03 00:51:19I have an electric range with 4 burner/coils
one of the burner coil gets hot when I turns on baking switch to bake. I don't even have to turn on this particular burn coil.
It sounds like the switch got messed up and baking switch also turns on one of the burner coil?
Anyone has any experience of this?...
Whirlpool Gas Range Self Cleaning Problem2011-10-25 09:17:06I have a Model SF385PEE gas range which does not go into the self clean cycle because the door will not latch. There is no click or closing clunk. The display gives a F5 error code. What needs to be done to begin the cycle? Thanks...
GE Range Top Burner Shorted Out!2011-11-04 06:45:23GE Mod.#JBP26GS1 range shorted out while i had pan on it.It arced and stuck to the pan. It also shorted out the clip receptacle.I have relaced the 8' burner and the clip recept. But it does not work.Was wondering if its the switch or is there some kind of fuse that could have blown.Everything else on the stove seems to work fine.Old stove so don't want to put much more money into it.the switch is'nt expensive Just looking for good advice. Oh yeah the previous day it shorted, our power went off for a few seconds .Wonder if a power surge caused the problem?Thanks you all....
gas range outlet2012-10-05 20:36:04Got the fridge outlet done- Now I'm looking at where the new gas range will go- (but the wife hasn't picked one out yet!)- In any event- I was looking at the specs for the more common brands out there and many of them require a 20 amp dedicated outlet. One model tells you 'about' where to install the outlet, but since we have yet to pick out the model- is there a good 'rule of thumb' as to where to install the outlet in relation to the gas line etc???...
whirlpool rf386fxgq range2012-04-23 18:22:38My whirlpool range went to clean cool after using oven. I shut off breaker and waited several hours to restart. when I turned on the power and turned on the top burner the oven came on and would not go off til I threw the breaker. Appreciate any help with this problem...
Oven in my Tappan Range wont work, but the range top works fine2012-10-03 23:56:05I moved my range out to give it a good cleaning and when I moved it back the oven no longer worked. Range top works same as always. Range is about 3 years old. Tappan model #TEF351EWC. Does anyone have any troubleshooting directions?...
Whirlpool Range Tripping Circuit Breaker2011-10-25 09:16:42I have an electric Whirlpool range for about 5 years now. It's a glass top burner free standing range. I've noticed in the last 8 mos or so, very intermittently, the range will trip the cuircuit breaker. Seems to occur mostly when there is a large draw (use burners and over at same time). But recently it just seems that using just the oven can cause the tripping.
Sometimes breaker will reset, but now, I can reset the breaker, stays tripped.
range element too hot2011-10-25 16:56:37On our Maytag electric range model CRE9500ACE one of the four coiled burner elements on the top of the stove started getting too hot, seems like it works okay for a while then all of a sudden it shoots up to like the highest setting even though I might have the control dial setting to medium or medium low (there are actually ten indicators on the control knob, low and 2 thru 8 and high, or you can turn it to anywhere between any of the settings). Then I go to turn it down but it just stays really hot until I have to just turn it off. I'm assuming a bad switch? If so I wonder where it is, how to access it and replace it....