candy grand o go1482 fault codes
Hello all my washing machine has stopped working it is a candy grand o go1482 the 90 min light and the stain removal light
flash 8 times does anyone know what this code means?
View related: candy grand o go1482 fault codes again2011-10-25 10:54:43My washing machine is now flashing 7 times at the end of the cycle does anyone know what this means, is there anyway I can get a list of all the codes....
Candy GO1482 drum won't turn2011-11-02 17:01:44Can anyone help,
got a candy GO1482 which is 2 years old, the machine will fill with water but nothing else....
candy washing machine fault codes>>>2012-08-23 01:26:12Took a long time to source these codes so i thought it might be a good idea to share them with others>>
Candy grand washing machine fault2013-03-04 19:48:42Evening all got a Candy grand 8kg washing machine that's started stopping mid wash and prior to that would do the same on selected settings now seems to be on them all I dont wash at high temps just 30/40 as a rule,...
Candy Grand O 1282 8 flashes2011-10-26 01:54:24My candy grand O 1282 washing machine gets part way through a cycle and then stops with the lights flashing in sequences of 8. I'd be very grateful if anyone knows what this is trying to tell me? Thanks, David....
CANDY GRAND O ,FLASHIN LIGHTS2011-10-27 12:34:13HELLP my candy grand o washing machine has started having problems i,e on a 60 wash , half way through it,l stop and the the END TIME + STAIN vanish will start to flash 3 flashes , STOP THEN 3 FLASHES AGAIN ,,help dont no wat to do...
Candy Grand O Washing Machine - Model GO 482/2-802012-06-13 21:45:58Does anybody know the error codes for this washing machine. I am having problems with it - it won't go into spin mode, the drum just turns. Its pumping out ok. but just drains and stops and I am getting an error code of 16 flashes. Anyone know what fault this indicates?...
Candy GO1482 Washing Machine fault2011-11-03 16:09:08I have the above and i've got a whining noise when the thing is in the spin cycle. It sounds like a bearing has gone or something. Anyone had any similar problems and possibly a remedy?...
Candy Grand O GO1462011-10-26 04:33:33I have a Candy Grand O GO146, yesterday the mains power went off, when i restored the power, the washing machine was not working.
by process of elimination, i checked the fuse in the plug, by exchanging it with another working appliance. that was ok.
the power is not geting to the program or pc board, at least none of the led's are lighting up, which leads me to believe that either of those items could have poped.
Is there anybody out there that could shed some light on the subject?...
3 flashing lights on candy grand o 482/1-802011-10-25 14:34:18Hello,
My Candy Grand O washing machine is flashing the 90 and the stain remover lights.
The problem happens at end of the washing cycle on any setting. Also even if i put it on a drain or spin cyle it happens.
I've cleaned the filters, checked all wiring.
The lights flash 16 times now at start up.
I'm completely at a loss.
Any help will be amazing.
Candy washing machine fault2011-10-24 21:55:27I have a candy grand O 1400 washing machine, which developed a fault by making a funny noise then stopped and could not restart, i took back off and found one of the wire connectors on the heater element was burnt off, so i cropped the wire back and fitted a new terminal connector and reconnected it, put power back on but no joy.
none of the lights on the panel light up and nothing works, i checked with a meter and there is voltage getting through to the machine and there does not appear to be an earth fault, i suspect the fault is in the pcb, any ideas of what to do next, the machine is 5 years old...
candy grand stain vanish problem2011-10-26 01:15:45hi i wondered if anyone can help ? i have a candy grand washing machine ,the problem is it keeps stopping half way into a cycle and the stain vanish light is flashing ,i then open the door and all the clothes are still soaking wet ,i have checked the filter at the bottom of the machine and that seems clear and the hose which is also at the bottom does not have any kinks in it ,can anyone help ?
Candy Grand O tumble dryer float switch location2013-01-29 23:02:16Hi,
I'm having a problem with my Candy Dryer, the light is on telling my the water tank is full.
I have emptied it but the light stays on.
I understand that the most likely explanation is that the float switch is either kapoot or jammed.
The problem is I can't for the life of me work out how to get to it.
The Grand O model doesn't have removable side panels as both the sides and the rear are made up of one piece of metal.
Any pointers would be very gratefully received!!
Candy Grand O GO 146 DF Error 142012-07-01 08:21:23Hi
Candy is buggin me with error code 14 and i cant find the solution.
about 2 years old.
everyday use, almost.
Candy Grand O 8kg Dryer2012-02-26 12:16:30Hi,
I have the above dryer and its about two months out of warranty. It wont work at all and all the lights including the normal fault warnings and power and end lights are illuminated when I switch it on. Does anyone know what is likely to be the cause of this, theres nothing in the manual.
Thanks in advance.
Problem with Candy Grand'O GO292-80 9kg Washing Machine2011-10-25 10:53:51I bought a Candy Grand'O GO292-80 9kg washing machine over 18 months ago. During a wash, the mains power got cut off and when power was restored, the washing machine seemed to have trouble recognising the chosen cycle on the dial. Now, I can't get it to wash at a chosen cycle and it will spend ages flashing between all the different cycles. I tried to put it on a 'Quick 32' wash, but I've no idea what programme it actually washed at, it went on for well over 90 mins and ended with a 600 spin! (the 32 wash spins at 800 so I know it definitely wasn't that one.)
Any ideas how I can get it to wash at what the dial is turned to?...
Beko DWD 8650 S Fault Codes2011-10-25 08:54:58Hi,
I have a Beko DWD 8650 S dishwasher, which after approx. 10 minutes of running goes into a 'crash loop' where it switches off, comes on, some lights flicker, goes off, comes on (and so on)
I have done quite a big of Googling, but can't find what the fault codes mean, i get fault codes:
H3, H5, H6 and H7
Can anyone help with what these mean... and how to fix it!
Baumatic BTWM5 Washing Machine Fault F072011-11-03 02:13:33Hello,
Just had this fault appear half way through the wash cycle (F07), does anybody know what the fault code relates to? The manual only tells you codes up to F04 and then say's contact service for fault codes F05-F10.
Candy Washing Machine - hopefully simple problem!2011-10-28 22:33:31Hi,
I have a Candy Grand GO146 washing machine that even though is a couple of years old has only just gone into use! All has worked fine but it now keeps throwing up a problem that I can't get passed. Usually once you have chosen the programme you can then select the required spin speed etc. Once the programme is selected it will not move off the 'no spin' option and sticks at 15 minutes programme time. I have turned it off, unplugged it, let it run through the 15 minutes etc etc but cannot now get it to allow me to select and use any programme.
Have looked at Candy sites but can find nothing of any use at all - any ideas gratefully received.
Thanks in advance......
Candy go1482 80 issue! Changed parts still not working????2012-09-10 22:56:17Hi
I have the above machine and it recently through a spanner and refused to finish a cycle and kept giving me code 9 which i found to mean ( electronic control module fault)..
When i checked the module i found the circuit board was burnt out in the centre and ruined so i replaced it with another thinking that was the end of that!! Wrong!! Then it showed error 5 ( fault on wiring of heat sensor or faulty thermostat) . Checking the wiring i found a fair bit of it was showing heat damage so i then replaced the whole wiring loom which was quite a mission and thought that was the end of it Wrong again!! Now its not showing the fault 5 but again showing the fault 9 around 20 mins into the cycle like it did in the beginning !! I have checked the module again and all seems ok with no signs of damage???? Seems odd that after replacing the module and even the whole loom im still getting the same fault?? Wondered if anyone could shed some light on this as im out of ideas here tbh.. Almost got a new machine here and my misses is needing it working asap lol...